A solar energy system and a generator transfer panel meet different needs, but when planned together they reduce both energy costs and the risk of outages. We explain the role of each panel and what to consider when using them together.
Power cuts can cause serious losses for hotels, schools, healthcare buildings, businesses that depend on the cold chain and farms that rely on irrigation. At the same time, rising energy costs are leading many businesses and homeowners towards solar energy systems. These two needs call for different solutions: a solar energy system generates power, while a generator transfer panel provides a safe changeover to a backup source when the mains fails. When designed correctly, these systems complement each other.
What does a PV panel do?
Solar modules produce direct current (DC); this is converted to alternating current (AC) by an inverter and then consumed or fed into the grid. PV panels keep this chain operating safely and are usually considered on two sides:
- DC side: String fuses for the strings coming from the modules, DC disconnectors and surge protection devices. Extinguishing an arc is harder in DC circuits than in AC circuits, so choosing components rated for this use on the DC side is important.
- AC side: Circuit breakers, residual current protection, surge protection and, where needed, metering devices from the inverter output to the grid connection point or the consumer panel.
In rooftop and ground-mounted systems, the risk of lightning and overvoltage, whether the panel is outdoors and the ambient temperature also determine the choice of components and IP protection rating.
How does a generator transfer panel (ATS) work?
A generator transfer panel continuously monitors the mains voltage. When the mains fails or the voltage goes outside acceptable limits, it sends a start command to the generator and transfers the load once the generator is ready. When the mains returns and remains stable for a set time, the load is transferred back to the mains and the generator is stopped after its cool-down period.
- Interlocking: Connecting mains and generator to the load at the same time is dangerous. Transfer switches prevent this with electrical and, where needed, mechanical interlocking.
- Separating critical loads: Generator capacity may not always be enough to supply the whole facility. Grouping critical loads such as lighting, lifts, cold rooms, pumps or IT in a separate section makes it easier to size the generator correctly.
- Testing and monitoring: Periodic test runs and fault alarms can be set up via the controller.
How are solar and a generator planned together?
For safety reasons, grid-tied PV inverters stop generating when the mains voltage is lost. How the inverter responds when the generator starts depends on the system design and the inverter’s characteristics. Where solar and a generator are installed at the same facility, the following points should be clarified at the design stage:
- Whether the PV connection is made on the mains side or the load side of the transfer panel.
- How PV generation will be limited or disconnected while running on the generator.
- If a battery storage (hybrid) system is being considered, setting up changeover scenarios that are compatible with the inverter.
These points are decided specifically for each project by reviewing the technical specifications of the inverter and generator manufacturers together.
Who is it suitable for?
For hotels, schools, businesses and farms with high daytime consumption, solar is an effective way to reduce energy costs. In hospitals, hotels, cold chain and production facilities where outages are unacceptable, a generator transfer panel is a fundamental safeguard. In villas and homes, these two systems can also be planned together with smart home system panels.
Conclusion
At Aynalı PLC & Otomasyon we design PV panels, generator transfer panels and the related distribution panels together according to the structure of the facility, manufacture them in line with IEC 61439-1&2 and commission them after on-site testing. Contact us to assess the scope of your project.