Terzialiler Mah. Şerifnazbaşoğlu Cad. No: 34/A, Ortaca We're open now · Mon–Sat 08:30–18:30
Get a Quote 0532 157 28 88 WhatsApp

Mon–Sat 08:30–18:30

What Is a Power Factor Correction Panel and How Does It Prevent Reactive Power Charges?

05 November 2026 · 4 min read

What Is a Power Factor Correction Panel and How Does It Prevent Reactive Power Charges?

If you see reactive energy charges on your bill, the cause is often the inductive loads in your facility. We explain what a power factor correction panel does, how it works and what a properly designed system takes into account.

Many business owners who see a “reactive energy charge” line on their electricity bill wonder why they are paying extra for the same amount of work. Behind this there are usually inductive loads such as motors, air conditioners, pumps and compressors. A power factor correction panel meets the reactive power demand of these loads within the facility, easing both the bill and the electrical infrastructure. In this article we explain the logic of power factor correction in plain language.

Active power, reactive power and power factor

Part of the energy a facility draws from the grid is converted into heat, light or mechanical motion; this is called active power. Wound devices such as motors and transformers, however, must create a magnetic field in order to operate. The power needed for this magnetic field flows back and forth between the grid and the device and does no useful work; this is called reactive power.

The ratio of active power to total (apparent) power is expressed as the power factor (cos φ). As the power factor drops, more current is drawn from the line to do the same work. This means unnecessary loading of cables, breakers and transformers, higher losses and voltage drop.

Why do reactive energy charges arise?

Because the distribution system also has to carry reactive power, the relevant regulations require certain subscriber groups to keep reactive consumption within specific limits relative to active consumption. When inductive or capacitive reactive consumption exceeds these limits, a reactive energy charge may appear on the bill. As limits and practice can vary by subscriber type, you should assess your own situation based on your bill and information from your distribution company.

How does a power factor correction panel work?

While inductive loads draw reactive power, capacitors generate reactive power in the opposite direction. A power factor correction panel supplies the reactive power the facility needs locally with capacitors instead of drawing it from the grid. Its main components are:

  • Reactive power controller: Continuously measures current and voltage, calculates the power factor and decides which step should be switched in.
  • Capacitor steps: Capacitors grouped in different ratings are switched in individually or together as needed.
  • Contactor or thyristor switching: Switches the steps in and out. Thyristor switching may be preferred in facilities where the load changes rapidly.
  • Protective devices: A fuse or breaker for each step provides protection against short circuits and overcurrent.
  • Harmonic filter reactors: May be needed in facilities with many harmonic-generating loads such as drives, inverters and UPS units, to protect the capacitors and prevent resonance.

What matters for correct compensation?

Simply installing a power factor correction panel is not enough; the system must be correctly sized and checked regularly. The main points we focus on during survey and design are:

  • Load profile: Recent bills and the facility’s operating pattern are reviewed to determine the total capacitor rating and step distribution required.
  • Step structure: A balanced mix of small and large steps prevents over-compensation, that is, moving to the capacitive side when the load is low.
  • Harmonics: If there are harmonic loads, a filtered design is considered.
  • Current transformer location: For the controller to measure correctly, the current transformer must be placed where it sees the entire facility load.
  • Ventilation: Capacitors are sensitive to heat, so the enclosure and ventilation are chosen accordingly.

Maintenance and monitoring

Capacitors lose capacitance over time and contactor contacts wear. It is therefore advisable to check the compensation system at regular intervals and to monitor the controller records and the reactive ratios on your bills. If you see an unexpected reactive charge on your bill, it is often a sign that a step has failed or that new load has been added to the facility.

Conclusion

A power factor correction panel is one of the key elements of energy efficiency for hotels, workshops, industrial facilities and commercial businesses with high inductive loads. At Aynalı PLC & Otomasyon we design power factor correction panels specifically for each facility’s load profile, manufacture them in line with IEC 61439-1&2 and commission them on site. Contact us to review your bills and your facility’s load profile together.

Related articles